Peachtree Avanti Steel Door Weatherstrip, Q-Lon, Extended Reach, 96 Length,

Complete Set of 2-Part Vinyl insert and Replacement Weatherstrip.
Replaces original Peachtree Avanti door weatherstrip (had a 1/4"-wide kerf in door frame)
Plastic Insert is 5/16 inch wide and will compress to 1/4 inch
The plastic insert is not available by itself.

Extended Length of 96 inches
For standard 81" length see 842048-81E-KIT

Contents:
1. 2 pieces of 96" extended reach weatherstrip; 1 96" piece will go on the lock side of the door; cut the other piece down to approximately 36" for the top of the door
2. 1 piece of 96" standard reach weatherstrip; this is for the hinge side of the door (extended reach will not work on the hinge side -- it's too thick)
3. 6 pieces of 48" plastic insert; these are used with your weatherstrip; they are cut down because we cannot ship long lengths of this product; you may need to cut to fit

*Note:you will have leftover weatherstrip and inserts. We encourage you to save these. In the event that your weatherstripping wears in one particular spot you can replace it as needed (you do not have to install this in long strips for the entire side; you can cut it down and replace in sections).

This weatherstrip can be installed 2 ways:
1. Peachtree suggests installing Plastic insert 1st, then install the Weatherstrip
2. We think it is easier to put plastic insert and weatherstrip together before installing.
May require using a block of wood to tap into some doors with tight kerfs.

Reach Options:
Standard Reach Set - Used on doors that are in regular or good working condition.
Extended Reach Set - Used on doors that are out of square or warped.

SHIPPING: This part is shipped folded during our shipping process.
The fold puts a crease in the barb / bulb.
This will NOT affect performance when installed.

This upcharge guarantees that your weatherstrip is not folded during our packing process.

Related Door Parts:
841007 - Corner Pad weather seal